Oak Ridge crew spray-applying a polyurea roof coating over a metal roof deck

Polyurea Coatings
That Last Decades

Led by OR-80SLM Silver Lining Membrane and OR-90WPM — 100% solids pure polyurea for roofing and waterproofing, plus fast-set systems for bed liners, containment, bridge decks and industrial floors. Zero VOC. Gel time in seconds. Return to service in minutes.

Performance That Sets Polyurea Apart

Fast Set Time

Gel time measured in seconds. Full cure in minutes. Crews can overcoat or return surfaces to service the same day, dramatically reducing project downtime.

100% Solids

Zero VOC. No solvents evaporate away — every ounce sprayed stays on the substrate as cured film. Delivers maximum film build per pass and no shrinkage.

Chemical Resistant

Exceptional resistance to fuels, fertilizers, acids, alkalis, and salt solutions. Ideal for secondary containment, tank linings, and industrial processing floors.

UV Stable Options

Aliphatic topcoat grades retain color and gloss under direct sun exposure. Ideal for roofing membranes, vehicle liners, and exterior surfaces requiring long-term appearance.

Proven Across the Most Demanding Environments

Polyurea spray-applied truck bed liner finish
Truck Bed Liners
Spray-applied, seamless protection
Polyurea waterproof roofing membrane application
Roofing & Waterproofing
Seamless monolithic membranes
Polyurea protective coating on concrete floors and structures
Concrete Protection
Floors, ramps, industrial slabs
Badger Black polyurea protective coating applied to bridge structure
Bridge Coatings
Corrosion & impact protection
Polyurea tank lining for fuel and agricultural chemical storage
Tank Linings
Fuel, chemical & ag containment
Polyurea industrial floor and dump truck liner application
Industrial Floors
High-traffic, chemical-exposed areas

WatchGuard Roofing Systems

WatchGuard is Oak Ridge Foam & Coating's premium brand for spray polyurethane foam roofing systems. Every WatchGuard system pairs high-density roofing foam with a purpose-formulated polyurea or elastomeric topcoat — engineered together from the start for maximum adhesion, flexibility, and longevity.

  • Foam + topcoat engineered as a matched system
  • Seamless, self-flashing around penetrations
  • Available in white reflective and pigmented finishes
  • Compatible with full ORFC rig and foam packages
WatchGuard spray foam roofing system being applied by contractor

8 Standard Colors. Custom Matching Available.

All colors are formulated in-house using our polyurea base. UV-stable pigment packages maintain color integrity under prolonged sun exposure.

Polyurea bed liner in Black
Black
Polyurea bed liner in Blue
Blue
Polyurea bed liner in Red
Red
Polyurea bed liner in Green
Green
Polyurea bed liner in Orange
Orange
Polyurea bed liner in Tan
Tan
Polyurea bed liner in White
White
Polyurea bed liner in Yellow
Yellow

Colors shown are representative. Custom colors and special blends available on request. Minimum order quantities may apply.

Polyurea Product Line

Two products carry most of the work: OR-80SLM for roofing and OR-90WPM for waterproofing. Everything below them is a specialist.

OR-80SLM Silver Lining Membrane being spray-applied to a commercial metal roof
Primary — Roofing
OR-80SLM Silver Lining Membrane

Miami-Dade tested 100% solids pure polyurea roof membrane. 2,850 PSI tensile, 400% elongation and a UL 2218 Class 4 hail rating. Seamless and self-flashing over spray foam, metal, concrete and existing membranes — the product most Oak Ridge roofing crews build their season around.

  • Commercial and low-slope roof restoration
  • Spray foam roof topcoat
  • Metal roof recover and detail work
Applicator spraying a polyurea waterproofing membrane on a concrete deck
Primary — Waterproofing
OR-90WPM Waterproofing Membrane

100% solids pure polyurea seamless waterproofing membrane for foundations, tanks, planters, tunnels and below-grade structures. Sprays to full thickness in a single pass, bridges cracks and comes back into service in minutes rather than days.

  • Foundations and below-grade waterproofing
  • Secondary containment and tank linings
  • Ponds, planters and water features
Aromatic
OR7K

General-purpose aromatic polyurea for truck bed liners, secondary containment, and industrial flooring. Excellent tensile strength and elongation.

Product details
Fire-Rated
OR7K-FR

Flame-retardant variant of OR7K for spray foam roofing topcoats and enclosed applications where fire codes apply.

Product details
Bed Liner
ORBL

Formulated specifically for truck and trailer bed liners. Eight standard colors, textured finish, high-impact and fuel resistant.

Product details
Waterproofing Sealant
Badger Black

Single-component, coal-tar-free moisture-cured polyurethane waterproofing for basements, bridges and buried structures. Brush, roll or spray.

Product details
See the full catalog

Full SDS, physical data sheets, and application guides live in the Resources library. Contact ORFC for current pricing and certifications.

The right coating system,
backed by expert support.

Whether you're building a bed liner business, waterproofing commercial rooftops, or lining industrial tanks — ORFC has the polyurea system, equipment, and training to get you profitable fast.

Call us at 800-625-9577 — we'll match the right system to your application.