Sealed ag bags and grain storage on a working farm protected with Oak Ridge coatings
Agricultural Liners & Coatings

Protect Farm Equipment and Storage
with Durable Coatings

Repair hail-damaged ag bags, prevent fuel spills, and shield storage tanks from corrosion. Oak Ridge liners and coatings give your farm clients durability and energy efficiency that cuts maintenance cost and extends equipment life.

One Line of Coatings for Everything Your Clients Store

Farms lose money in the same three places every year: feed escaping through a torn ag bag, fuel escaping through a rusted tank or a worn delivery line, and steel quietly corroding where nobody is looking. Oak Ridge supplies the sprayed liners and protective coatings that close all three — applied on site, over the equipment your clients already own.

The value proposition you take to a farm client is simple: durability plus energy efficiency. A coated tank or bag needs less maintenance, holds temperature better, and stays in service years longer than an uncoated one. That is lower operating cost for them and repeat work for you.

Repair hail & rodent damage

Agri-Seal goes straight over torn ag bags and stops feed loss.

Prevent fuel spills

Protective coatings on storage and delivery systems mean fewer leaks and no cleanup bill.

Protect storage tanks

A sprayed barrier keeps corrosion off the steel and improves energy efficiency.

Extend equipment life

Less maintenance, longer service life, lower cost per season.

Where Oak Ridge Coatings Earn Their Keep on a Farm

Applicator spraying Agri-Seal onto a silage ag bag in a corn field

Ag Bags & Feed Storage

Hail and rodents open holes in ag bags, and every hole is feed going to waste. Agri-Seal sprays directly over the damage and seals it under a tough, weather-resistant barrier that moves with the bag instead of cracking off it. Your client stops the loss at the source, and the bag serves out its full life instead of being written off after one storm.

  • Repairs hail and rodent damage in place
  • Tough, weather-resistant barrier over the tear
  • Prevents feed loss and spoilage
  • Extends usable bag life
Farm storage tank finished with a seamless Oak Ridge protective coating

Storage Tank Farms

A sprayed protective layer over storage tanks keeps moisture and chemistry off the steel, so corrosion never gets started. The same layer improves energy efficiency by holding product temperature steadier through the day — and tanks that are not fighting rust simply last longer.

  • Protective layer that prevents corrosion
  • Improves energy efficiency
  • Longer tank service life, less repainting
Weathered farm fuel storage tank on a stand beside a red barn

Fuel Storage Farms

Farm fuel storage sits outdoors through every season it is asked to survive. Coating the tank shields it from weather damage and guards against spills, which keeps your client’s fuel reserve where it belongs — in the tank, ready for the next planting or harvest.

  • Prevents weather damage to the tank shell
  • Guards against leaks and spills
  • Keeps fuel reserves safe and usable
Fuel delivery tanker parked alongside bulk fuel storage tanks

Fuel Delivery Spill Prevention

Delivery systems take the hardest use on the property. A durable protective layer over fuel delivery equipment means fewer leaks, less environmental impact, and none of the cost, downtime and paperwork that follow a spill cleanup.

  • Durable protective layer for fuel delivery systems
  • Fewer leaks, lower environmental impact
  • Avoids costly cleanup and downtime

Tough, Long-Lasting Coatings for Fuel and Storage Tanks

The last liner your clients will ever need. Three product families cover practically everything a farm stores, hauls or fuels — and all three go on where the equipment already sits.

Liner System

Industrial Liners

Seamless sprayed lining for tanks, hoppers, containment areas and vessels. It bonds to the substrate and follows every weld, corner and fitting, so there is no seam to split and no sheet to shift out of place. Rebuilds the inside of equipment your client would otherwise be replacing.

Fertilizer hopper before and after being lined with an Oak Ridge industrial liner
Spill Protection

Protective Spill Coatings

Built for fuel storage and fuel delivery. A monolithic protective barrier over tanks, stands, pads and delivery equipment that contains what would otherwise leak — keeping fuel off the ground and your client out of a cleanup.

Fuel delivery equipment protected against spills and leaks
Ag Bag Coating

Agri-Seal Spray Coating

Oak Ridge’s ag bag and feed storage coating. Sprayed on site over hail or rodent damage, it seals the bag under a weather-resistant skin that stays put through the season — preventing feed loss and extending the life of the bag.

Punctures in a silage ag bag of the kind Agri-Seal is sprayed over to repair

Energy Savings and Protection

Oak Ridge’s agriculture flyer lays out the same three jobs on one page — storage tank farms, fuel storage farms and fuel delivery spill prevention — with photos from real installations.

View the flyer
Oak Ridge Energy Savings and Protection flyer for agricultural storage and fuel systems

Not sure which product fits the job? Tell us what your client is protecting and we will help you pick the right system.

Four Reasons the Work Keeps Coming Back

Proven Performance

Agri-Seal has a track record on working farms — on bags that took hail, on storage that had to make it through winter. You are not testing it on your client’s operation.

Onsite Convenience

Spray-on application means the coating is applied exactly where it is needed, on equipment that never leaves the yard. Minimal downtime for your client and no haulage in your quote.

Energy Savings

Coated storage holds temperature better, which cuts heating, cooling and general operational cost across the season — the argument that closes the sale for most farm clients.

Built to Last

Formulated for harsh weather, rough conditions and heavy use. Farm equipment does not get an easy life, and neither should the coating on it.

Spray Foam Agricultural Buildings

Oak Ridge supplies spray foam insulation systems for agricultural buildings nationwide — including pole barns, swine buildings, poultry houses, dairy facilities, machine sheds, and grain storage structures. Our closed-cell spray foam products are engineered for the specific requirements of farm building insulation: high R-value, excellent adhesion to metal substrates, dimensional stability, and resistance to the moisture conditions present in livestock facilities.

Polyurea Farm Coatings

Polyurea coatings are rapidly replacing conventional paint and epoxy systems for agricultural chemical containment, farm fuel tank protection, dairy barn floors, and equipment coating. Unlike paint, polyurea adheres permanently, forms a seamless membrane, and resists the full range of chemical exposures on a working farm — fertilizers, herbicides, pesticides, manure acids, diesel fuel, and hydraulic fluids. Oak Ridge's BadgerBlack and OR7K systems are proven in agricultural coating applications across the Midwest and nationwide.

Farm Building Insulation ROI

The return on investment for spray foam insulation in agricultural buildings is well-documented. Energy cost reductions of 30–50% in heated livestock facilities are typical, and payback periods of 3–7 years are common depending on building size, energy costs, and the severity of the local climate. Beyond energy savings, spray foam eliminates condensation damage, reduces maintenance costs, improves livestock performance in temperature-controlled environments, and increases the value of farm structures.

Request info on Oak Ridge ag coatings

Tell us what your client is protecting — ag bags, storage tanks, fuel systems, hoppers — and we will point you at the right product and the right data sheet. Head to our contact page for help with product selection.