Polyurea & Protective Coatings
Polyurea Coatings
That Last Decades
Led by OR-80SLM Silver Lining Membrane and OR-90WPM — 100% solids pure polyurea for roofing and waterproofing, plus fast-set systems for bed liners, containment, bridge decks and industrial floors. Zero VOC. Gel time in seconds. Return to service in minutes.
The Polyurea Advantage
Performance That Sets Polyurea Apart
Gel time measured in seconds. Full cure in minutes. Crews can overcoat or return surfaces to service the same day, dramatically reducing project downtime.
Zero VOC. No solvents evaporate away — every ounce sprayed stays on the substrate as cured film. Delivers maximum film build per pass and no shrinkage.
Exceptional resistance to fuels, fertilizers, acids, alkalis, and salt solutions. Ideal for secondary containment, tank linings, and industrial processing floors.
Aliphatic topcoat grades retain color and gloss under direct sun exposure. Ideal for roofing membranes, vehicle liners, and exterior surfaces requiring long-term appearance.
Applications
Proven Across the Most Demanding Environments
ORFC Premium Roofing Brand
WatchGuard Roofing Systems
WatchGuard is Oak Ridge Foam & Coating's premium brand for spray polyurethane foam roofing systems. Every WatchGuard system pairs high-density roofing foam with a purpose-formulated polyurea or elastomeric topcoat — engineered together from the start for maximum adhesion, flexibility, and longevity.
- Foam + topcoat engineered as a matched system
- Seamless, self-flashing around penetrations
- Available in white reflective and pigmented finishes
- Compatible with full ORFC rig and foam packages
Bed Liner Color Options
8 Standard Colors. Custom Matching Available.
All colors are formulated in-house using our polyurea base. UV-stable pigment packages maintain color integrity under prolonged sun exposure.
Colors shown are representative. Custom colors and special blends available on request. Minimum order quantities may apply.
Key Products
Polyurea Product Line
Two products carry most of the work: OR-80SLM for roofing and OR-90WPM for waterproofing. Everything below them is a specialist.
Miami-Dade tested 100% solids pure polyurea roof membrane. 2,850 PSI tensile, 400% elongation and a UL 2218 Class 4 hail rating. Seamless and self-flashing over spray foam, metal, concrete and existing membranes — the product most Oak Ridge roofing crews build their season around.
- Commercial and low-slope roof restoration
- Spray foam roof topcoat
- Metal roof recover and detail work
100% solids pure polyurea seamless waterproofing membrane for foundations, tanks, planters, tunnels and below-grade structures. Sprays to full thickness in a single pass, bridges cracks and comes back into service in minutes rather than days.
- Foundations and below-grade waterproofing
- Secondary containment and tank linings
- Ponds, planters and water features
Formulated specifically for truck and trailer bed liners. Eight standard colors, textured finish, high-impact and fuel resistant.
Product detailsSingle-component, coal-tar-free moisture-cured polyurethane waterproofing for basements, bridges and buried structures. Brush, roll or spray.
Product detailsFull SDS, physical data sheets, and application guides live in the Resources library. Contact ORFC for current pricing and certifications.
Contractor insights & guides
Polyurea vs. Silicone vs. Acrylic: Which Roof Coating Wins?
Commercial roofing contractors face a choice between polyurea, silicone, and acrylic roof coating systems. This comparison covers installed cost per sq ft, performance in ponding water, UV stability, recoatability, and profit potential so you can choose the right coating for every bid.
What is the Best Type of Spray Foam Machine?
Choosing the right spray foam proportioner is the most important equipment decision you'll make. From Graco Reactor entry-level units to high-output PMC systems, this guide compares output, pressure, heat capacity, and total cost of ownership so you can buy the right machine for your business.
Applicator Bulletin: Conversion from HFC to HFO Blown Closed Cell Foams
The phaseout of HFC blowing agents affects every spray foam contractor. This applicator bulletin explains what's changing, how HFO-blown foams differ from HFC in processing and performance, and what adjustments you need to make to your equipment and technique.
Get Started with Polyurea
The right coating system,
backed by expert support.
Whether you're building a bed liner business, waterproofing commercial rooftops, or lining industrial tanks — ORFC has the polyurea system, equipment, and training to get you profitable fast.